Universal Testing Machine

"TECHPLAST is Leading Manufacturer of UTM Machines. Load Capacity: 20 kg to 10000 Kg Single & Multi Yarn Test. No of Test: -Tensile,Elongation,Compression,Flexural , MOE/MOR . Speed: Variable with AC frequency drive. Pre-Set Speed: 10 TO 400 mm/min. Tensile, flexural, compression Grip: - 01 Set Minimum Grip Separation: 25mm Maximum Grip Separation:700mm Microprocessor based load indicator: Accuracy of +/- 0.05% of load indicated Newton or Kg. can be selected. Load cell I/P “ one Extension meter: Least count of 1 mm through proximity/encoder switch. Over load excess elongation protection provided. Floor Model Paint: Powder Coating Power: 230V Ac / 50 HZ& 440 V AC / +N, E / 3 PHASE

"TECHPLAST is Leading Manufacturer of Core Compression Strength Tester. The Core Compression Tester / Core Collapsing Strength Tester can test the horizontal load bearing strength or crushing force of Paper Tubes and Paper cores used in winding Yarn / Textiles / Paper / Foils / Films / Laminates, etc. This winding tension of the material being wound, creates a squeezing / crushing force acting radially inwards on the tube / core. Poor quality cores, collapse inwards under this stress. Suitable for: Flat Crush Test (using flat adoptersISO 11093) Radial Crush Test (using curved adopters) Load Capacity: 100 kg to 5000 Kg Speed: Variable with AC frequency drive. Pre-Set Speed: 10 TO 100 mm/min. Compression Grip:- 01 Set. Minimum Grip Separation:25 mm Maximum Grip Separation:700mm Microprocessor based load indicator: Accuracy of +/- 0.05% of load indicated Newton or Kg. can be selected. Load cell I/P “ one Extension meter: Least count of 1 mm through proximity/encoder switch. Over load excess elongation protection provided. One pair of grips provided to hold the samples. Floor Model Paint: Powder Coating Power:230 V / 50 Hz &440V Ac/ 3 phase, + N, E.

"TECHPLAST is Leading Manufacturer of Flexural Strength Tester. The flexural strength of a material is defined as its ability to resist deformation under load. For materials that deform significantly but do not break, the load at yield, typically measured at 5% deformation/strain of the outer surface, is reported as the flexural strength or flexural yield strength. The test beam is under compressive stress at the concave surface and tensile stress at the convex surface. Load Capacity: 20 kg to 500 Kg Speed: Variable with AC frequency drive. Pre-Set Speed: 1 TO 60 mm/min. Reference standard: - ASTM D 790 Flexural Grip: - 01 Set. Minimum Grip Separation:25 mm Maximum Grip Separation:700mm Microprocessor based load indicator: Accuracy of +/- 0.05% of load indicated Newton or Kg. can be selected. Load cell I/P “ one Extension meter: Least count of 1 mm through proximity/encoder switch. Over load excess elongation protection provided. One pair of grips provided to hold the samples. Floor Model Paint: Powder Coating Power:230 V / 50 Hz.